Series
S2000  (Detailed
pdf Infomation) |
High
performance digital controller
Suitable to control Valve/Spear system and other manufacture's system
< Advantages >
- Easy to handle Windows like drop-down menu and a large display.
- Current Closed Loop Control and Voltage Compensation Circuit contribute
to stable molding regardless of the power condition.
- In compliance with CE Standard. Designed to resist disturbance noise while
it doesn't produce radiated noise.
|
 |
 |
| Series
VMC(Detailed
pdf Infomation) |
General
200V / 240V Heater Controller
< Advantages
>
- LCD touch panel - bigger and
better screen (- for easy handling)
Compact (322*450*526, 20kg) and versatile
Adoption of the Card Cage Method
- Compliance with EMS / EMI of
EN Standard
Connectable to an electric molding machine
- Equipped with Soft Pulse Output
Control*
Preventive measures for noise emission
|
 |
|
| Series
AHC (Detailed
pdf Infomation) |
2 models of compact controller are available for small-cavity-number molding to control Valve system and Spear system.
< Advantages >
Conventional HC type (for Valve) and AYC type (for Spear) were integrated into this new controller type.
- The two models of controller are available for controlling Seiki’s almost all Valves and Spear probes.
- Their common type of display improves operationality and service-parts compatibility.
Upgraded controller
- Quick-blow fuses equipped in all output circuit phases prevent in-circuit damage of semiconductors.
- 5bit Analog to Digital Converter is incorporated in the temperature-measuring circuit.
|
 |
|
| Series
ACS8(Detailed
pdf Infomation) |
Pneumatic
Drive Valve System Individual control on each valves
< Advantages >
- The LCD touch panel makes checking and the modification of settings easy.
It enables to get a grasp on the operation conditions readily available.
It also shows Warning messages that indicate alarming conditions.
- O/C on the PLC direct drives the Solenoid valves.
This system uses no relay therefore it enables to prevent the Solenoid valves from a malfunction caused by contact fault.
- Bigger air supply hose.
Pneumatic circuit configuration stabilizes the open/close operation of the valves.
- This model comes with a build in air tank to accommodate multiple valve molding also.
|
 |
